We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The gas ventilation/gas interlock system to comply with AS/NZS 5601.12022 shall be manufactured by Oceania Gas Safety

The model to be supplied is the OGS Merlin 1200S System which is 140mm (height) x 190mm (length) x 62mm (depth). The Merlin 1200S can interlock with up to two fans by using air pressure differential switches. In the event where the ventilation fails the gas solenoid valve should be closed and the system will go into ‘fan fault’ alarm.

1 x OGS Merlin 1200s Panel
2 x Air PD Switch (20-300PA)
1 x Goldseal Gas Solenoid Valve (size)
1 x Emergency Stop Button (one per exit)

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected to the gas safety system.
Also connections can be made to the fire alarm and BMS to shut the gas solenoid valve in the event of a genuine alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The boiler house gas safety system shall be manufactured by Oceania Gas Safety.
www.oceaniagassafety.com

The model to be supplied is the OGS Merlin 500S System which is 113mm (height) x 163mm (length) x 62mm (depth). The Merlin OGS 500S System allows provides manual control of the gas supply via the key switch.

1 x OGS Merlin 500S Gas Isolation Panel
1 x Goldseal Gas Solenoid Valve (size)
1 x Emergency Stop Button (one per exit)

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected with the gas safety system.
Also, connections can be made to the fire alarm and BMS to shut the gas solenoid valve in the event of a genuine alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification and edit where required:

The Water Leak Detection System shall be manufactured by OGS.
www.oceaniagassafety.com

The OGS Merlin WDP is a water leak monitoring system that has been specifically designed to help achieve the requirements of Greenstar credits (non-domestic buildings). The WDP system will allow designers, M&E contractors and developers reduce the impact of water leaks that may otherwise go undetected.

The OGS WDP monitors water flowing through a pulse water meter. If the volume of water reaches the pre-set limit (customer adjustable) the system can isolate the mains water pipe, therefore limiting the amount of water and leak damage.

• Timer & programmable clock built in
• Two stage monitoring for occupied and unoccupied buildings
• BMS output
• 2 zone input for reading 2x water meters (boundary and incoming)
• Volt free normally closed input for emergency stop buttons, fire alarm & security systems
• Remote sounder strobe output
• 230VAC & 24VDC outputs for water solenoid valves

OGS WDP

1 x Merlin WDP Water Detection Panel
1 x Pulsed Water Meter (size)
1 x Water Solenoid Valve (size)
1 x Sounder Beacon

Connections can be made to the fire alarm and BMS to shut the water in the event of a genuine alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au











“

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The Mini Merlin is a dual gas sensor carefully designed and tested to monitor Natural Gas – Methane (CH4) and Carbon Monoxide (CO) in the air (LPG & CO also available). If there is a dangerous build-up of gas or unsafe levels of carbon monoxide at the sensor, this device can shut off the gas supply via a gas safety valve and/or a gas fire appliance.

1 x OGS Mini Merlin (CH4 CO)
1 x Goldseal Gas solenoid Valve

This device has additional features for resetting systems, as well as audible and visual alarms – it can also be integrated with a Building Management System (BMS).

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The OGS Homesafe is designed for buildings and dwellings in Australia and New Zealand where Multilayer Pipe is used as part of the consumer piping. New buildings with multilayer pipe and modification of consumer piping in existing buildings with multilayer pipe will now require automatic isolation in the event of a fire. In the form of an class 1 automatic shut-off valve interlocked to a fire safety system. Designed to meet AS/NZS 5601.1.2022, Part 5.2.11 Provision of Fire Emergency Isolation for Multilayer Pipe.

1 x OGS Homesafe Gas Control
1 x Goldseal Gas solenoid Valve

The OGS Homesafe will isolate the gas supply in the event of a fire alarm activation. When the system is reset, it will perform a downstream gas pressure proving test on the pipework to check for any leaks before the gas is restored.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The boiler house gas safety system shall be manufactured by Oceania Gas Safety.
www.oceaniagassafety.com

The Boiler house gas safety system to be supplied is the OGS Merlin GDP2 System which is 140mm (height) x 190mm (length) x 62mm (depth). The OGS Merlin GDP2 System can connect with two gas detectors.

Natural Gas and Carbon Monoxide Detectors shall be fitted and connected with the gas safety system. In the event where natural gas is detected the gas safety system should go into alarm and close the gas solenoid valve.

1 x OGS Merlin GDP2 Gas Detection System
1 x Merlin Natural Gas Detector
1 x Merlin Carbon Monoxide Detector
1 x Goldseal Gas Solenoid Valve (size)
1 x Fusible Link (over each boiler)
1 x Emergency Stop Button (one per exit)

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected with the gas safety system.
Also, connections can be made to the fire alarm and BMS to shut the gas solenoid valve in the event of a genuine alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The gas proving system to comply with AS/NZS 5601.12022 shall be manufactured by Oceania Gas Safety.

The model to be supplied is the Merlin 2000S System which is 178mm (height) x 254mm (length) x 62mm (depth) and this will come with a gas pressure transducer to carry out a gas proving test on all the downstream appliances. The Merlin 2000S can interlock with up to four fans by using air pressure differential switches. In the event where the ventilation fails the gas solenoid valve should be closed and the system will go into fan fault alarm.

1 x OGS Merlin 2000S Panel (includes proving transmitter)
2 x Air Pd Switch for interlocking ventilation. (1 per fan)
1 x Goldseal Gas Solenoid Valve (size)
1 x Emergency Stop Button (one per exit)

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected to the gas safety system. Also, connections can be made from the fire alarm and BMS to shut the gas solenoid valve in the event of an alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The gas proving, electric and water control system to comply with AS/NZS 5601.12022 shall be manufactured by Oceania Gas Safety.

The model to be supplied is the Merlin 1000VW+ System which is 178mm (height) x 254mm (length) x 62mm (depth) and this will come with a gas pressure transducer to carry out a gas proving test on all the downstream appliances and interlock with any ventilation. The Merlin 1000V= is designed to give the teacher full control over the incoming gas supply with the lockable key-switch operation and timed gas control. Merlin 1000VW+ System also has an output to control the electrical supply to the equipment and control a water solenoid valve.

1 x OGS Merlin 1000VW+ Panel (includes proving transmitter)
1 x Goldseal Gas Solenoid Valve (size)
1 x Water Solenoid Valve
1 x Emergency Stop Button (one per exit)

Optional

1 x Air Pd Switch for interlocking ventilation.
1 x CO2 Detector for monitoring air quality.

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected to the gas safety system. Also, connections can be made from the fire alarm and BMS to shut the gas solenoid valve in the event of an alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The gas proving/ electrical control system to comply with AS/NZS 5601.12022 shall be manufactured by Oceania Gas Safety.

The model to be supplied is the Merlin 1000V+ System which is 178mm (height) x 254mm (length) x 62mm (depth) and this will come with a gas pressure transducer to carry out a gas proving test on all the downstream appliances and interlock with any ventilation. The Merlin 1000V= is designed to give the teacher full control over the incoming gas supply with the lockable key-switch operation and timed gas control. Merlin 1000V+ System also has an output to control the electrical supply to the equipment.

1 x OGS Merlin 1000V+ Panel (includes proving transmitter)
1 x Goldseal Gas Solenoid Valve (size)
1 x Emergency Stop Button (one per exit)

Optional

1 x Air Pd Switch for interlocking ventilation.
1 x CO2 Detector for monitoring air quality.

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected to the gas safety system. Also, connections can be made from the fire alarm and BMS to shut the gas solenoid valve in the event of an alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au