Spec Wizard Outputs

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The gas proving system to comply with AS/NZS 5601.12022 shall be manufactured by Oceania Gas Safety.
The model to be supplied is the Merlin 1000V System which is 178mm (height) x 254mm (length) x 62mm (depth) and this will come with a gas pressure transducer to carry out a gas proving test on all the downstream appliances and interlock with any ventilation. The Merlin 1000V is designed to give the teacher full control over the incoming gas supply with the lockable key-switch operation and timed gas control.

1 x OGS Merlin 1000V Panel (includes proving transmitter)
1 x Goldseal Gas Solenoid Valve (size)
1 x Emergency Stop Button (one per exit)

Optional

1 x Air Pd Switch for interlocking ventilation.
1 x CO2 Detector for monitoring air quality.

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected to the gas safety system. Also, connections can be made from the fire alarm and BMS to shut the gas solenoid valve in the event of an alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The gas proving system to comply with AS/NZS 5601.12022 shall be manufactured by Oceania Gas Safety.

The model to be supplied is the Merlin 1000V System which is 178mm (height) x 254mm (length) x 62mm (depth) and this will come with a gas pressure transducer to carry out a gas proving test on all the downstream pipework. The Merlin 1000V is designed to give the user full control over the incoming gas supply with the lockable key-switch operation.

1 x OGS Merlin 1000V Panel (includes proving transmitter)
1 x Goldseal Gas Solenoid Valve (size)
1 x Emergency Stop Button (one per exit)

Optional

1 x Air Pd Switch for interlocking mechanical ventilation.

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected to the gas safety system. Also, connections can be made from the fire alarm and BMS to shut the gas solenoid valve in the event of an alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au

We have compiled a list of products required to satisfy your brief, please copy and paste the text below into your specification:

The boiler house gas safety system shall be manufactured by Oceania Gas Safety.
www.oceaniagassafety.com

The Boiler house gas safety system to be supplied is the Merlin 1000BH System which is 254mm (height) x 178mm (length) x 62mm (depth) and this will come with a gas pressure transducer to carry out a gas proving test to highlight if there is a gas appliance open or a gas leak. The Merlin 1000BH is designed to give the user full control over the incoming gas supply with the lockable key-switch operation.

Natural Gas and Carbon Monoxide Detectors shall be fitted and connected with the gas safety system. In the event where natural gas is detected the gas safety system should go into alarm and close the gas solenoid valve.

1 x OGS Merlin 1000BH Gas Pressure Proving & Gas Detection (incl. Gas Pressure Transducer)
1 x Merlin Natural Gas Detector
1 x Merlin Carbon Monoxide Detector
1 x Goldseal Gas Solenoid Valve (size)
1 x Fusible Link (over each boiler)
1 x Emergency Stop Button (one per exit)

There should be a means of isolation by each main exit and any emergency knock-off buttons should be connected with the gas safety system.
Also, connections can be made to the fire alarm and BMS to shut the gas solenoid valve in the event of a genuine alarm.

Contact All Controls for a quotation.

03 9123 1275
Email:

vi*******@al*********.au