Merlin GDP2X Gas Detection System
Multi use Gas Detection System
The Merlin GDP2X is an 8 zone gas detection panel which can be used in many applications, e.g. mechanical rooms, car parks, shopping malls and the most common being a boiler house application.
The GDP2X has a touch screen which displays two modes, the engineers mode and the user mode. A settings dip switch inside the controller allows the engineer/user to configure the system. When changes have been, the system will automatically restart once the settings switch is off.
Many varieties of detectors are compatible with GDP2X, e.g. Natural Gas, Carbon Monoxide, LPG, Refrigerant Gas and Oxygen depletion. Up to 8 detectors can be used in any combination and can be individually monitored on the GDP2X TFT display.
Also multiple heat detector links can be used, when wired in series. The GDP2X can be integrated with a BMS, fire alarm and remote EPO buttons. Gas detectors are fixed remote from the GDP2X panel & should be wired back to the GDP2X panel with four wire low voltage cable.
Select the emergency button & gas solenoid valve size you require using the relevant tabs on the page. Please contact Oceania Gas Safety or your local representative for further information.
- Design Ideas
- GDP2X Datasheets
- Select an Emergency Button
- Select a Gas Solenoid Valve
- Select a Gas Detector
- PDF & CAD Wiring Information
- Videos
EM Stop Buttons
OGS Merlin Gas Solenoid Valves 240VAC
OGS supply gas solenoid valves ranging from 3/8″ to 8″.
**OTHER SIZES ARE AVAILABLE UPON REQUEST. CONTACT Oceania Gas SAFETY OR YOUR LOCAL REPRESENTATIVE FOR FURTHER INFORMATION.